Longballz Max Weight Instructions

Note: Assembled drivers come pre-set for the correct weight based on the length of club ordered and require no further adjustment unless desired.

The LongBallz Max comes with ( 3) 1 gram black plastic weights, (2) 2 gram, (2) 5 gram and (2) 8 gram screw weights which can be used to alter the club head weight to match the length of the driver or to increase or decrease the amount of draw bias and/or increase trajectory (see diagram below). When adjusting weight gently turn the plastic 1 gram screws in place. Do not attempt to over-tighten to avoid stripping.

Recommended Weights per Driver Length

45-45.5” driver length – Lighter Feel (1) 8 gram (1) 2 gram (1) 1 gram,  Heavier Feel - (1) 8 gram (1) 5 gram (1) 1 gram, Maximum Weight - (2) 8 gram & (1) 5 gram

46-46.5” driver length – Lighter Feel - (1) 5 gram, (1) 2 gram & (1) 1 gram, Heavier Feel - (1) 8 gram (1) 2 gram & (1) 1 gram Maximum Weight - (2) 8 gram (1) 1 gram

47-47.5” driver length – Lighter Feel (1) 5 gram & (2) 1 gram, Heavier Feel (1) 8 gram & (2) 1 gram, Maximum Weight (1) 8 gram (2) 2 gram 

48” driver length – Lighter Feel (3) 1 gram, Heavier Feel (1) 5 gram and (2) 1 gram, Maximum Weight (1) 5 gram and (2) 2 gram

Do not exceed maximum recommended weights. Too much weight can reduce swing speed and over stress a shaft. 

Longer driver lengths can also be cut down to standard or shorter lengths for golfers who are uncomfortable swinging a longer club and re-weighted according to the recommendations above.. Drivers are cut down from the grip end which can be performed by any experienced club maker or golf shop.

Altering Ball Flight

The LongBallz Max can use the weighting system to increase draw bias or trajectory and decrease the amount of draw bias as follows:

Maximum Draw Bias - Place the heaviest weight per the instructions above in the heel weight port

More Draw Bias with Higher Trajectory - Place 1 weight in the heel and 1 in the rear weight ports

Higher Trajectory - Place the heaviest weight in the rear weight port

Neutral Bias -   Place the heaviest weight per the instructions above in the toe weight port

.
Neutral Bias with Higher Trajectory - Place 1 weight in the toe and 1 in the rear weight ports

Weight Identification

8 gram - long brass screw

5 gram - short brass screw

2 gram - medium size gold color aluminum

1 gram - black plastic